Membership card refers to common identification card, including shopping malls, hotels, fitness center, restaurants and other entertainment establishments membership certificate. They use a very wide range of bills relating to the need to identify the identity of the place, can be applied to the identification card, such as schools, clubs, companies, institutions, organizations.
Membership-based service is now popular as a service management model, which can improve customer retention rates, improve the enterprise customer loyalty. Many service industries have taken such a service model, membership in the form of most of them expressed as membership cards. Membership card issued by a company representing the company's business cards, membership cards can be printed at the company's logo or design for the company's image for publicity, is an ideal vehicle for advertising companies. At the same time issuing membership cards can also serve to attract new customers, retain old customers and strengthen the role of customer loyalty, but also to achieve discounts, credits, customer management and other functions, is a truly viable way to increase efficiency.
Membership card system are generally membership cards, membership cards, reading and writing equipment, membership card management software composition. Application process: production of membership cards - "issuing membership cards -" customers to use - "Management, billing -" statistics, reports. Membership card types are generally ordinary printing cards, magnetic cards, IC cards, ID cards of several; while the corresponding magnetic card reader read-write equipment, IC card reader, radio frequency card reader a few. Management software may be different according to each company to prepare for their own business management system, in which ordinary PVC card is the easiest kind of management style does not need any other device support can be applied.
Membership cards of the standard specification: 85.5 * 54 * 0.76mm, with a common bank card or less the same layout design can be personalized customer requirements, the card can be attached to seal the body plus magnetic stripe, barcode, signature of.
Membership Card Production Notes:
1. The proper orders issued as a coreldraw files, and has been converted into bitmap effects, words, symbols, patterns must be converted to curves.
2. Within the frame size: 85.5mm * 54 mm, frame size: 88.5 mm * 57 mm, the card rounded to 12 degrees.
3. A small convex yards for 12 fonts, large convex yards for 18 fonts, available in bold, small yards and large convex-convex spaces yards with a maximum of 19. Convex yards can be silver or any other gold and silver hot stamping, special requests can be done personality convex yards.
4. Convex margin code and the card must be greater than 5mm, magnetic stripe card compartment box side (the upper and lower) side of 4mm, magnetic strip width of 12mm.
5. Magnetic Card: convex position code designed to do down to the back of the card or magnetic stripe credit card will not be.
6. Convex design of the location of yards down to the back of the bar code will not or can not read barcode data, bar code card bar code according to the customer to provide models to stay out of space.
7. Color Tone: To compare the ideal phase of the range of 18% -85%, if the high-light parts of less than 18% or more than 85% of the darkened part of the color gradient is less.
8. Color mode should be C, M, Y, K, the positive and negative plain black text or black coloring K100, solid block of anti-white text, white text must add white border.
9. Line thickness of not less than 0.076 mm, otherwise the print will not be rendered.
10. Shade, or a base map color settings do not less than 8%, so that when printed materials can not be rendered.
11. Orders before the manuscript indicate the following:
A. Note how many cards the total production, indicating the card number from which the beginning, as well as special requirements, card number for small convex yards, big yards convex, flat yards or Coding? Card number need bronzing, hot or not hot silver color? There are several signatures on the back of? Every card number or tail number "4" or "7" Do you want to remove.
B. a positive pattern or text, if necessary bronzing or silver hot also need to focus on tagging.
C. If the special production process should be the next single manuscript in detail.
12. As the card carrier is not the same as the printing, so printing out the finished product and the computer display or print out will have a certain color color draft.
13. Coloring book coloring be in accordance with CMYK colors, the computer screen, color and color printer can not print color as.
[1] Member Card Production Process:
1. Signed a contract
2. Preliminary design
3. Are being issued to confirm
4. Film making
5.PS Edition
6. Printing (offset printing, silk screening)
7.'s Magnetic
8. Laminated
9. Stamping signature of
10. Red card
11. Milling groove
12. Chip Package
13. Detection
14. Packaging
15. Storage
16. Customer
Plastic Card Production Time:
If no card personalization process is only being on the back of four-color offset printing in general 50000 what can be produced out of seven days, if water code, braille, bar code on the need to increase 1 day. The number of 50000 or more would require card factory orders, according to the arrangements for planning and consultation of the.
Membership card common production process
01. Membership Card can provide material for layout, but also can provide design draft.
02. Membership card thickness from 0.30mm to 0.76mm, the thickness can also be made of other.
03. Membership card standard size is 85.5mm X 54mm, rounded corners. You can also made into other dimensions.
04. Membership cards can be printed single-sided or double-sided, using screen printing or offset printing (CMYK four-color printing) printing method.
05. In each and every one membership card sprayed with different numbers, PIN codes or text.
06. Membership cards can add a signature to be or WordPad (you can hand-write area).
07. Membership cards can be based on customer demand combined with low density or high-density magnetic stripe (three tracks magnetic stripe).
08. Membership card can play yards convex, convex yards can be bronzing or silver hot.
09. Membership card to play in the round hole or strip holes.
10. Membership card can be assumed on the scratch on the Coding section (commonly used in rechargeable card \ Phone Card \ draw cards, etc.).
11. Membership cards can be marked with various types of bar code.
12. Membership card number can be arranged in order, you can also play personalized, there is no rule number.
13. Membership cards can be made into a square, circular and any other irregular shapes.
14. Membership card, a background color can be made into imitation imitation gold or silver.
15. Membership card can be hot on the gold or silver.
16. Membership cards can be made of frosted or glossy surface, sub-surface effects.
17. Membership cards are available in white PVC material, frosted effect or completely transparent transparent material transparent material.
Magnetic Card
Plastic Card is the use of magnetic carriers with the digital information recorded in English, used to identify the identity card or other purposes.
A card-shaped magnetic recording media, with a variety of readers with the role. Magnetic card is the use of magnetic carriers recorded some information used to identify the identity card or other purposes. As
The use of different substrates, magnetic cards can be divided into PET cards, PVC cards and paper cards three kinds; depending on the different magnetic structures, magnetic stripe card and the whole can be divided into two kinds of coated magnetic card.
Magnetic easy to use, cost of cheap, extremely versatile, can be used to produce credit cards, bank cards, subway cards, bus cards, ticket cards, telephone cards; electronic games, cards, tickets, air tickets and a variety of transport fare cards. Today, on many occasions that we will use magnetic cards, such as canteens, in the mall shopping, bus, called into the control region, and so forth.
Magnetic technology
Magnetic card is a kind of magnetic recording media card. It consists of high-strength, high temperature resistant plastic or plastic coated paper can be moisture-proof, wear-resistant and have a certain degree of flexibility, easy to carry, use a more stable and reliable. Typically, the magnetic side of the printing has made it clear indicative information, such as card orientation; the other side, there's magnetosphere, or magnetic stripe, with 2-3 tracks to record the relevant information and data.
Is a layer of thin magnetic orientation by the arrangement of particles of iron oxide material (also called pigment). Resin adhesive bonding closely together and bonding such as paper or plastic substrates such as non-magnetic media.
In essence magnetic strip and computer tapes or disks used in the same, it can be used to record letters, characters, and digital information. By adhesive or heat sealing with plastic or paper firmly together form a magnetic card. The information contained in the magnetic stripe than the length of bar code generally large. Within the magnetic strip can be divided into three separate tracks, known as TK1, TK2, TK3.TK1 up to write 79 letters or characters; TK2 can write up to 40 characters; TK3 can write up to 107 characters. As the magnetic low-cost, easy to use, easy to manage, and have certain security features, so it has been the development of many world-renowned companies, especially national government departments to throw its weight behind several decades, making the application of magnetic cards is very popular all over the national life all its aspects. It is worth mentioning that the universal banking system for decades to promote the use makes the magnetic penetration has been a great development.
Range of application: bank cards, securities, insurance: credit card, quasi-credit card, ATM card, ATM cards, debit cards, debit cards, special cards, stored-value cards, co-branded cards, business cards, personal cards, corporate cards, social insurance cards, social security cards, securities trading cards ...
Retail services: shopping cards, cash cards, membership cards, gift cards, order cards, discount cards, points cards, etc.
Social Security: Life and accident insurance cards, health cards
Transport Tourism: auto insurance cards, travel cards, room card locks, passport card, parking card, pay TV cards, highways paid card, check card
Medical: patient cards, health check-card, blood donor card, diagnostic picture cards, blood cards, health record cards, maternity cards, medical cards, insurance cards, prescription cards
Special documents: identity card, temporary card, seal registration card, tax-free card ...
Education: CAI card, library card, student card, report cards, counseling cards, scorecard ...
Entertainment: video card, Kara OK cards, entertainment cards, theater cards
Other: Factory Automation card, operator cards, quality control card, access control cards, work cards, personal record cards, home security cards, etc.
My company designed and manufactured a magnetic strip, its raw materials, imported PVC, high-quality magnetic product made, combined with advanced printing technology, large-scale color offset printing equipment (Heidelberg), high-speed multi-coder and so on, production of finished products in full compliance with the international standard.
Plastic Card Factory Standard: (according to ISO7811, ISO7816 international standard)
① kaki Size Standard: kaki Length: 85.47mm-85.72mm Width: 53.92mm-54.03mm
ISO standard (magnetic card) Thickness: 0.76mm (excluding magnetic strip thickness) IC Card Thickness: 0.84mm ± 0.02mm
Special thickness: Based on the demand side, demand production of error ± 0.03mm
Printing Technology: According to the different user needs, with offset printing, silk screening, printing and other printing methods, using one or a variety of printing printed at the same time to demand an increase in the card bronzing, hot silver and other special craft Zhuanban to meet the users need the best quality and visual needs.
historical overview of magnetic
The use of magnetic cards has been a long history. As the magnetic low-cost, easy to use, easy to manage, and have certain security features, so it has been the development of many world-renowned companies, especially national government departments to throw its weight behind several decades, making the application of magnetic cards is very popular all over the national life all its aspects. Call can be magnetic, plane ticket can be magnetic, the stock market can be magnetic, and so on, it is worth mentioning that the universal banking system for decades to promote the use makes the magnetic penetration has been a great development.
According to the information reported that the U.S. average (adult) people have all kinds of magnetic cards up to 4, Singapore has similar coverage. In the United States and some other developed countries, due to magnetic cards are widely used in banking, securities and other systems, the application of magnetic card system is perfect, if the existing applications of these magnetic systems, including Visa Card / MasterCard card application system, including, all are being replaced increasingly sophisticated smart card system, then at least on an annual investment of billions of dollars, and will seriously affect the lives of people use the habits and the normal operation of other applications. This is also the smart card system in the United States, European countries, slower than the development of the reason why. In the future, a very long period of time, such as the United States in particular, a bank card application system is highly developed countries, bank card applications will work with the smart card application systems co-exist in a complementary manner. Smart card security and confidentiality of the overall sex ratio of magnetic do better, but very good card applications (such as banking systems) to fill in the card itself features on the security and confidentiality of its shortcomings, it is not apparent to the user experience of two kinds of cards there are differences and impact of security features and so on.
[Edit this paragraph] the classification of magnetic
Magnetic type: the general anti-magnetic cards (300oe)
High resistance to magnetic cards (3500oe)
Direct Tu-Indian Type: Low-resistance magnetic card (300oe) (such as: Park tickets)
High resistance to magnetic cards (2700oe) (such as: Subway cards, phone cards)
magnetic stripe and track
There are three track magnetic stripe. Track 1 and track 2 is read-only tracks in the use of the information recorded on when the track is only allowed to deliver and are not allowed to write or modify. Track 3 is to read and write tracks in use can read, you can also write.
Track 1 can record the number (0-9), letters (A-Z) and other symbols (such as brackets, separator, etc.), the largest can record 79 numbers or letters.
Track 2 and 3 recorded the characters can only be digits (0-9). Track 2 recorded maximum 40 characters, the track record of three maximum 107 characters.
[Edit this paragraph] the use of attention to the issue magnetic cards
Magnetic stripe cards in use will be subject to many external factors that interfere with
☆ magnetic stripe card in purse, wallet medium-range magnetic button too close, or even come into contact with magnetic button.
☆ and Women handbags, men handbags, magnetic button too close to or contact.
☆ Address Book with with magnetic seal, laptop touch.
☆ put on a magnetic button and cell phone, car keys and other magnetic objects in contact.
☆ and cell phone electromagnetic radiation, such as the equipment can produce a long time together.
☆ with TV sets, tape recorders and other effects of strong magnetic field too close to home appliances.
☆ when used in supermarkets, and supermarkets in the anti-theft devices used in degaussing too close or even contact.
☆ multiple magnetic stripe cards put together, the contact between two magnetic strip cards.
In addition, the magnetic stripe card pressure was off for a long time knocking, exposure, high temperature, magnetic stripe magnetic stripe scratch card dirty, also will not work properly. Meanwhile, credit card transactions on the credit card device in the process of head cleaning, the aging degree of interference during data transmission, system error movements, cashier, and so may result in improper operation can not be used magnetic stripe cards.
Principles of magnetic recording
Recording head from the annular gap within the core and wrapped around the core composition on a line graph. Card is a piece by a certain material base and evenly coating the film base made of the above magnetic particles. In the records, magnetic cards magnetic surfaces moving a certain speed, or recording heads with a certain speed movement, respectively, and the gap or magnetic recording heads facial contact. Once the pass on the head of the coil current, the void space is generated with the current proportional to the magnetic field, so magnetic contact with the gap part of the magnetic body was magnetized. If the record signal current change over time, then when on a magnetic card through the gap when the magnetic body (because the magnetic card or the head is moving), then with the current changes being magnetized to varying degrees. After being magnetized card, leave the magnetic gap magnetic layer on the left correspond to current changes in remanence.
If the current signal (or magnetic field strength) by the sine law of change, then the magnetic flux remaining on the same change in accordance with the sine rule. When the current is positive when elicited a left to right (from N to S) of the magnetic polarity; When the current is reversed, the reverse magnetic polarity followed suit. Its final results can be seen from N to S on the card and then back to N, a wavelength, it can be seen as connecting with the polarity of the two magnetic bar. This is a way to simplify the results, however, it must be remembered that the remanence Br is based on sinusoidal change. When the signal current is maximum, the vertical magnetic flux density reaches the maximum. Record signals to sinusoidal changes in the form of remanence records, stored on the card.
[Edit this paragraph] card works
Above the residual magnetic flux density Br in the magnetic card magnetic course of their work plays a decisive role. To a certain speed through the magnetic coil with the work of heads, magnetic cards magnetic field lines cutting the external coil, induced electromotive force generated in the coil, which transmit the recorded signal. Of course, also requires the work be recorded in the magnetic signal has a wide frequency response, less distortion and higher output levels.
A very thin metal line can be used as a simple playback devices. Metal straight lines and magnetic close, direction perpendicular to the direction of magnetic cards, magnetic cards run-time, the metal straight-line cutting magnetic field lines resulting from induced electromotive force, electromotive force and cutting the size of the magnetic field lines is proportional to. When the card's speed remains the same, the metal linear induction electromotive force and magnetic residual magnetic flux density is proportional to the surface, while the conductor of the inductive electromotive force by the following formula, said:
e = BrWv formula Br - surface residual magnetic induction intensity;
W - the width of the track record of Road;
v - playback speed when the magnetic cards.
In the case of Br = 2πf/vφrmcos2πft comprehensive Br, and the relation e get e = 2πfWφrmcos2πft. Of course, with a metal wire for magnetic work equipment, due to the output very small and therefore I was not practical.
The head is a high permeability coefficient of soft magnetic material of the core, coil winding wrapped around the top, head in front of a very narrow gap, then head of the magnetic flux to enter the work concerned, can be seen as two the effective parallel reluctance, that the gap reluctance and the reluctance core heads. Because the gap is much larger than the work of the effective magnetoresistive heads iron core reluctance, so the vast majority of magnetic flux on the core input to the head, and with the work of the head coil windings on the cross-linking occurred, which induced electromotive force, in this case Under a single replay of metal lines get free induction formulas are fully applicable to the work of annular magnetic heads, but the proportion of coefficients is different.
Set N of the coil turns, m for the head and work related to core size and magnetic coefficients, then the ring winding head arising from the work of the induction electromotive force is: e = 2πfWmNφrmcos2πft
Because the magnetic windings in the work of the electromotive force induced by the magnetic flux is proportional to the rate of change, that is, EMF e α By α frequency f. In the record i = Isinwt, vertical remanence density Bx α i (transfer curve of the straight part), so, Bx = K1Isinwt. As By α dbx / dt, e α By, therefore, e = K2Iwcoswt. Where K2 depends on the efficiency of the work of the head, turns, tape materials. These formulas also show that: the output voltage proportional to the records of current; the output voltage proportional to the signal frequency; the output voltage to be 90 °, the corresponding change (this change from sine to cosine above).
[Edit this paragraph] card international standards
1. ISO 7810:1985 Identification cards Physical characteristics
Card provides the physical characteristics, including card materials, construction, size.
Card size: Width 85.72mm ---- 85.47mm
Height 54.03mm ---- 53.92mm
Thickness of 0.76 ± 0.08mm
Card corner radius 3.18mm
Generally speaking, the card size: 85.5 X 54 X 0.76
2. ISO 7811-1:1985 Identification cards recording technology, Part 1: letterpress
Letterpress card set character requirements (character sets, fonts, character spacing and character height).
3. ISO 7811-2:1985 Identification cards recording technology, Part 2: Magnetic Strip
Provides magnetic stripe card features, coding techniques and coded character sets.
4. ISO 7811-3:1985 Identification cards recording technology, Part 3: ID-1 type card letterpress characters location
5. ISO 7811-4:1985 Identification cards recording technology, Part 4: Read-only track the first 1,2-track position
6. ISO 7811-5:1985 Identification cards recording technology, Part 5: read and write the first three tracks here tracks
[Edit this paragraph] card security and IC Card Comparison
With the continuous expansion of card applications, the magnetic card technology, particularly in the security technology has been difficult to meet the growing requirement of high security applications. Previous card on the application of security technologies, such as watermarking technology, holographic technology, precision magnetic recording technology, as time goes by their relative safety has been greatly reduced. The basic principle of its work is relying on its own "card number" to identify different card, so when the reader card number is relatively open, relatively easy to copy.
IC card (smart card chip, a) is written on the chip, some key parameters identified. IC card, when used, must be read-write devices with unique bi-directional key authentication. The factory, the first of the IC card is initialized (encrypted); to be delivered when needed by using the IC card issuance system, the subscriber card generate their own system of private key.
Now, we have video card (details to be added).
Card security and problems of
A. Card confidentiality and security of poor
Information on the magnetic stripe is easier to read, illegal modify content on the magnetic stripe is easier, so most cases are as a static magnetic data entry to use. Although the first three tracks can be read and write, and have the amount of field, only for a small amount of applications, such as phone cards.
B. The use of magnetic card application system need to have a reliable computer systems and the support of central database
In the financial industry, as a financial transaction cards, magnetic cards, generally with a strong, reliable computer network system to use, amount, transaction records and other information, are stored in a computer database of financial institutions, the user holds the card only provides the user's primary account number, etc. index information, easy to quickly find in the database, user data.
Card's main advantages: low cost, this is the reason it is easy to promote.
SLE Memory Card (smart card) Introduction
Common memory card SEL models: SEL4428/4442 capacity, respectively: 1K/256B, all data except passwords, the in any case can be read out, the password is correct in the check can be read out. All data can be byte write protected, write protect the data on curing, can not be changed under any circumstances. Error counter wrong password check the password once, then cut one. If the counter value is 0, then the entire card data is locked, only read out, can not be written or changed and can not continue to check the password; if not to 0, then the only one check is correct, the counter will revert to the original value. SEL4428 password error counter initial value of 8, SEL4442 is 3. Temperature range: -35 ℃ -80 ℃, at least 100,000 erase, at least 10 years of data retention. SLE4428 card without your password will be read out entire card data, so the design should pay attention to the content encryption, to prevent spoilers identification data format. Entire card is not partitioned, the password by checking the correct one will be able to either an address to write or modify data, the design should pay attention to proper curing of data and data content encryption, to prevent damage to data or illegal do not intend to change data. Password verification is correct and can be read out. Therefore, the design process must be able to prevent the use of illegal break spoilers run, direct way to read the password to steal passwords.
ATMEL Memory Card Introduction
Common ATMEL memory card models: AT24C01A/24C02/24C04/24C08/24C16/24C32/24C64 ATMEL memory card, which is not available encryption EEPROM card, AT24C for the serial number, the digital part is K-bit capacity, respectively, 1K, 2K, 4K, 8k, 16K, 32K, 64K. Its use exactly the same methods and EPROM, storage structure is simple, and only read and write two kinds of operations, mainly used to store some confidential information less demanding of data. AT24C series of operating frequency lMHz (5V), lMHz (2.7V), 400KHz (1.8V); working voltage is 5V ± l0%, the lowest available upon request to 1.8V; Icc current reading of a maximum of lmA, write a maximum of 3mA : write / erase times for the l00 million; data retention lO0 years; operating temperature of O-70 ℃, upon request, may exceed the specified temperature; communication protocols in line with ISO / IEC 7816-3 synchronization protocol, bi-directional serial interface. AT24C Series models for the latter two models, the largest number of K bits (1K = 1024), 8 bit is a byte, maximum bytes of storage capacity of the algorithm is K bits × l024 ÷ 8. Such as: AT24C01A-byte maximum storage capacity of 1 × 1024 ÷ 8 = 128, the bytes of address space for the O-127 (16 hex as 0x00-0x7F).
Contactless Smart Card
Contactless IC card by the IC chip, sensing antenna, packaged in a standard PVC card, no exposed parts. Non-contact IC card reading and writing process, is between the IC chip and the reader through radio waves to complete the read and write operations. Non-contact type IC card is a passive body, when the reader to the card read and write operations, read and write the signal emitted from the stack composed of two parts: one is the power signal, the signal received by the card after its its own L / C generated resonance, producing an instant energy to supply chips work. The other part is a combination of data signals, command and chips to complete the data changes, storage, etc., and returned to the reader, to complete a read or write operation. Main Card type is: Mifare 1, Sle44R16, Temic e5551, Em4102, etc.
Commonly used non-contact products: Mifare 1S50/Mifare 1S70 / FM11RF08
◇ Chip: Philips Mifare 1 S50
◇ storage capacity: 8Kbit, 16 districts, each district sets password
◇ Operating frequency: 13.56MHZ
◇ Communication Speed: 106Kboud
◇ read and write distance: 2.5-10CM
◇ read and write time: 1-2MS
◇ Working temperature: -20 ℃ -85 ℃
◇ endurance: "100000 times
◇ data retention: "10 years of
◇ Size: 0.87 × 85.5 × 54 / non-standard card
◇ Packaging Materials: PVC, PET, 0.13 coins
◇ Packaging Technology: Ultrasonic auto plant lines / Auto Collision Welding
◇ Production Standard: ISO 14443, ISO 10536
◇ range of applications: enterprise / campus card, bus card, highway fees, car parks, residential management and other non-contact type RF card chip FM11RF08
FM11RF08 chip is designed by the Fudan Microelectronics Co., Ltd. Non-contact type RF card chip, using 0.6 micron CMOS EEPROM technology, with the logic of processing a multi-purpose non-contact type RF card chip, containing encrypted control and communication logic circuits, has a very high security performance, applicable to all types of payment card billing system applications
Sensor ID Card
EM 4100/4102 standard card Inductive ID
Chip: EM Switzerland Micro Electric EM4102Water
Operating frequency: 125KHZ sensing range :2-20cm
Size: ISO standard card / thick card / multi-shaped cards
Packaging materials: PVC, ABS --
Typical Applications: attendance systems, access control systems, business card systems, etc.
4001 Inductive ID thick card
Chip: Taiwan 4001 COB
Operating frequency: 125KHZ sensing range :2-20cm
Size: 85.5x54x2mm packaging materials: PVC, ABS
Packaging Technology: hand-Paste
Number: LIEN Coding
Typical Applications: attendance systems, access control systems, business card systems, etc.
Barcode Card
Barcode is a set of encoding rules arranged in a certain section, empty symbols to indicate a certain characters, numbers, and symbols of information. Bar code system is composed of bar code symbol design, production and scan to read the composition of automatic identification system.
Barcode encoding (code system) Description:
Are many kinds of bar code, there are about more than 20 kinds of common code system, including:
Code39 Code (Standard 39 yards), Codabar code (Codabar), Code25 Code (Standard 25 yards), ITF25 yards (cross 25 yards), Matrix25 Code (matrix 25 yards), UPC-A code, UPC-E code , EAN-13 Ma (EAN-13 barcode international commodity), EAN-8 Ma (EAN-8 barcode international commodity), China Post code (matrix 25 yards a variant), Code-B Code, MSI Code ,, Code11 yards, Code93 codes, ISBN codes, ISSN yards, Code128 yards (Code128 codes, including EAN128 yards), Code39EMS (EMS-specific 39 yards), etc. such as one-dimensional bar codes and PDF417 two-dimensional bar code.
Currently, international widely used bar code types are EAN, UPC code (barcode for commodity, for in the world that uniquely identifies a commodity. We are the most common in the supermarket is this bar code), Code39 code ( can be expressed numbers and letters, the most widely used in the management field), ITF25 code (in logistics management application of more), Codebar code (used for medical, library area), Code93 Code, Code128 codes. Which, EAN codes are widely used in today's world of goods bar code has become an electronic data interchange (EDI) of the base; UPC code mainly for the United States and Canada; in various types of bar code application system, Code39 yards because of its available composed of numbers and letters together with the way the internal management in all sectors are widely used; in blood banks, libraries, and Zhao Xiangguan of the business, Codebar yards have also been widely used.
In addition to the above listed one-dimensional bar code, the two-dimensional bar code has also been developing rapidly, and have found applications in many fields.
Common Bar Description:
EAN Code:
EAN International Article Numbering Association code is developed by a commodity with a bar, common throughout the world. EAN code symbols have a Standard Edition (EAN-13) and the shortened version (EAN-8) are two types of bar codes with China's equivalent of a common commodity. Our daily goods purchased the bar code printed on the packaging in general is the EAN code.
UPC Code:
UPC code is the Uniform Code Council to develop a product with a bar, mainly for the United States and Canada, we in the United States imported goods can be seen.
Code 39:
39 yards is a can be expressed numbers, letters, and other information of the bar code, mainly for industrial, automation books and ticket management, and currently is widely used.
Codabar (Codebar) Code:
Codabar can also be said that numbers and letters of information, mainly for medical and health, library information, materials, and other areas of automatic identification.
Scratch off Plastic Card
Is the use of modern printing technology and computer information technology, combining a comprehensive anti-counterfeiting technology to ensure data security, enhanced security features, improved printing technology, the level of confidential data, greatly increasing the difficulty of illegal counterfeiting is widely used in sports Lottery, telecommunications rechargeable card and so on.
Password card, securities, security is the most important issue the card passwords. We have established a set of high standards of security systems, applied to the password card printing to the product shipped in every aspect, to prevent the various forms of cheating, alteration or peep.
Production area in the password card, installing video surveillance systems, large entrance, production zones, no blind spots around the clock video, camera control in part by expert management, timely reporting of suspicious circumstances on both sides of the gate all-weather surveillance, should not there be an outsider to enter This is basically the production in the password card from the camera all the coverage of the region to achieve a high degree of security results. The production of semi-finished products, waste strict checking and registration procedures, waste factory specifications before the supervisors under the completely destroyed.
Documents, cards, portrait cards, identification cards
Is currently the most popular card. Can be used, badge, business cards, temporary residence cards, attendance certificates, medical cards, work permits, service cards, customs certificate, tax certificate, meeting cards, membership cards, discount cards, student cards, driving licenses, press cards, certificates and other traffic police on duty production. The card can be printed individual color photo, name, number, title, logo, unit name of the department, bar code, etc., but not subject to quantitative restrictions, the absolute picture quality, clear and lifelike. According to the requirements of customers with different production processes.
Features:
1, suitable for a large number of printing
(1000 more)
2, photos of high-definition
3, never worn
4, unit cost is low
5, the most suitable production: induction card, student card, confirmation letter, medical card, insurance cards, etc.
Metal Card
VIP Gold Card, Member Card, Gold Card benefits, business cards, Gold, Gold Buddha statues and a series of products, materials and precious metals used were 18K, 24K gold surface processing via multi-channel traditional crafts and modern advanced technology crafted. Fusion of modern design ideas, showing extreme style. Extraordinary creativity, noble and elegant, with a collection of gift value. Business gifts can be used for advertising gifts. Gold imports of the Department of use of such high-level copper, after stamping, corrosion, electroplating, paint and many other processes Seiko filling made of. It has a unique three-dimensional sense of relief and real gold-like color, is to produce high-end VIP cards, membership cards, commemorative cards, calendars and cards, the material of choice. Welcome to major national hotel, hotels, clubs, custom to our company. In addition, this card is also particularly suitable for the production for the commemoration, a variety of commemorative cards for long, such as: wedding, opening, major conferences, the opening, calendars, retirement and so on. Welcome to custom.
Plastic Card Technology Documents
1) card body size range (international standard)
Length: 85.47mm ~ 85.72mm
Width: 53.92mm ~ 54.03mm
Thickness:: 0.76mm ± 0.06mm
Click here to download the card body of the standard size design comp
2) Material
PVC | Transparent PVC | ABS Coated | gold-plated PET
3) The system of card process
The whole system of card technology include: (bracketed portions of said customer demand may not include)
Design - Film - Printing Down - printing (offset printing, silk screening) - (magnetic) - (plus film, Varnish) - Laminated - (Signature of)
- Punching - (write magnetic; Braille, soup, gold and silver; Coding, tectorial membrane, or labeling; security, playing photo) - Inspection - Packaging
1. Design
Card production process design is the first link is also essential, and its design is reasonable direct impact on the entire
Part of the success or failure.
After the card design process should be in strict conformity with the requirements of the design process depends on the choice of color to consider printing (CMYK or spot color),
Printed sets of bits, die-cut bleeding bits, personalized shape and location; here attached to a standard style design
2. Film
Customer acknowledges that the design until after the draft, that is, a process of the film. Copy of the design to film output device, will design
Output in plastic film, like photography, like the images printed on film, the film is actually almost photographic film, only
Is not the same as saying just a little bit. The photo is the same color, while the film is to separate different colors printed on a different film on-chip,
Generally (C, M, Y, K) four-color, so color graphics products have four major film piece. A film prone to error,
Check the film is the key;
3. Printing Down
Direct sun silk screen printing line, offset drying PS edition. The film through the plate copying devices, the output on the PS version, PS version of the surface of
Is a special kind of sensitive material, through the Printing Down light irradiation printed on the PS above.
4. Printing
Printing should pay attention to four-color (CMYK) and spot color printing;
Spot-color, offset or silk screen (field): devoted to a particular color of ink to print that. Spot-color ink from the printing
Factory pre-mixed good or ink factory production. For each spot color printing, in printing a color version has a special right
Should be. The use of spot color make colors more accurate. Although the computer can not accurately represent the color, but by the standard color matching
System, pre-printed color sample cards, can see the color on paper the exact color, such as the Pantone color matching system is created
A very detailed color sample cards. Description: General spot-color printing allows 8% of the color error. Metallic color, offset printing press (particle point does not
Strong) or screen printing: and metal, like a texture, light sense of color.
5. Magnetic
The common magnetic stripe on the market are: Lucky magnetic stripe, Green magnetic stripe, KURZ (KURZ) magnetic stripe, CFC magnetic strip, BASF magnetic strip and so on.
There are two kinds of commonly used laminating and stripping, mostly in the domestic laminated; magnetic 3 track, two tracks (slightly smaller).
Magnetic Color There are many commonly used are black, brown, other such as: gold, silver, red, green and blue. Show different magnetic
The color of the reason is that the standard magnetic stripe painted the color of the protective layer caused. At present, the standard magnetic read and write magnetic-based
Different colors can be prepared to read magnetic stripe, write magnetic, so the color does not affect the normal magnetic stripe magnetic read and write magnetic. Usually low
Dense magnetic stripe of color is brown, high-density magnetic stripe color is black, to facilitate the users (including the system of card providers and card issuers) in the Health
Production, storage, and so the process from the color distinction between low-density and high-density magnetic stripe.
6. Film
There film (to prevent the color depth of cards Jie Mo) and non-film (white card and the card is light in color), the process move forward in the laminated
OK, the role of protective ink.
7. Varnish
Lamination varnish, to prevent the card body blasting cards; there is one, is to brush the surface of the card. However, differentiated, this viscosity is not strong, the main
To the protective role in the pyramid before, relatively lower than the cost of film.
8. Lamination
Through physical interaction and chemical interactions to enable multi-object bonding together to become an organic whole.
Laminating equipment, hot cells using electric heat or oil heating guided by the upper and lower two heating (pressure) plate, respectively, through
Tray under the liner to the outside to the inside of the PVC laminated sheets, fabric delivery temperature and pressure: As the liner plates and PVC
Sheets, fabric is gradually becoming subject to a moderate multi-card bubble of loose bodies, at different time points of their distribution by temperature, pressure level is not
The same: when PVC sheet, mask, Varnish and ink to the material softening point, produce a certain permeability between financial,
Water, oil, coupled with the grass-roots pressure the role of adhesive glue to make an adhesive. At this time, the right hot hot set-up time should be terminated; take
After the turn to reach out cold units; to withstand heat, pressure has a certain adhesion of the card after the body into the cold cell, while continuing to pressure (pressure
Hot force to increase more than 1-2Mpa) at the same time, using recycled water cooled by cooling water in order to achieve the pressure of the card body curing stereotypes
The purpose of laminated PVC card body and the function of: 1) to enable multi-layer structure of the card body as a whole bonding; 2) will cover the mask and coating combined
Light oil reservoir together with the adhesive sheet to protect the card body is the back printed graphics; 3) the implementation of the card body surface light and dumb
Light, semi-matte finish processing, the physical layout printed graphics card is more clear and bright, crisp colors give the sense of beauty. 4) to enable the card
Surface with a clean, smooth touch, the same time, with a scratch-resistant, non-hierarchical, non-Stripping, durable performance.
5) to enable the card with the whole surface of each individual processing of a variety of quality characteristics required.
For different products, different types of materials, laminate the card body to set parameters:
The number of so-called lamination parameters is an estimate only. As it relates to the relevant factors are too many variables, too many, so the set
Given a laminated card body parameters, we must consider product categories of material, thickness, the card body structure, product categories, as well as varnish,
Factors such as the type of ink varies, some tune. Must not be dogmatic rigid, in the adjustment should be to estimate the number of columns
Table based on fine-tuning and to make small batches for testing, and stability after the bulk of production.
Lamination process, pay attention to blistering effect and deformation, preferably in the dust-free environments, in addition to a good grasp of being against the bit,
Laminate effect are: Mirror, sub-surface, frosted.
9. Signature of Plastic card
There are two kinds of white and transparent, size and location determined by the designer or the client.
10. Punching
Cutting is a personalized process, common are: slices, shape, round hole, strip-hole, triangle hole, pressure lines.
First, pairs of large tracts of timber for slicing, and then according to customer's individual requirements drilling, pressure lines, and operations, if any, related
To the special-shaped cards, but also of the corresponding mold to shape of the punching. As a result, there are also punching the difference between standard and nonstandard
Different, this decision by the mold. In the punching process, we need special attention from film, glitches and other undesirable phenomena, we must ensure the punching position.
11. Write magnetic
Recording head from the annular gap within the core and wrapped around the core composition on a line graph. Card is a piece by a certain material base and uniform
To the film base coated magnetic particles made of the above. In the records, magnetic cards magnetic surfaces moving a certain speed, or
Recording head to a certain speed movement, respectively, and the gap or magnetic recording heads facial contact. Once the head of the coil pass
On the current, the void space is generated with the current proportional to the magnetic field, so magnetic contact with the gap part of the magnetic body was magnetized.
If the record signal current change over time, then when on a magnetic card through the gap when the magnetic body (because the magnetic card or the head for mobile
A), then with the current changes being magnetized to varying degrees. After being magnetized card, leave the magnetic gap magnetic layer
Corresponding to current changes in left remanence.
If the current signal (or magnetic field strength) by the sine law of change, then the magnetic flux remaining on the same by Sine
Law change. When the current is positive when elicited a left to right (from N to S) of the magnetic polarity; When the current is reversed, magnetic
Reverse polarity followed suit. Its final results can be seen from N to S on the card and then back to N, a wavelength can also be
Seen as connecting with the polarity of the two bar magnet. This is a way to simplify the results, however, it must be remembered that the remanence
Br is based on sinusoidal change. When the signal current is maximum, the vertical magnetic flux density reaches the maximum. Recorded signals with sinusoidal changes
The remanence of the form of records, stored in the card.
Write a magnetic process, pay attention to accurate data, according to the needs of clients to determine write magnetic track, as well as the card order.
12. Braille
Braille is a personalized process, we often appear on the braille card effect is the case, such as bank cards. In the use of
Braille machines for processing time to ensure that the font size and location, braille data have two kinds of cis-yards, and garbage.
13. Stamping
Stamping gold and silver color points, according to different materials, materials for hot stamping paper and silver paper, pay attention to stamping effect of saturation,
Braille pressure and temperature and other factors.
14. Coding
Coding that is, "ink-jet coding" refers to a number of related technologies, we use these technologies to make a very tiny ink droplets from the nozzle in the
Spray, drop through the air, and finally falls were formed on the surface of print material print pattern.
In the system card industry, the major manifestation Coding: serial number, password, barcodes. Of ordinary ink and UV ink ink. Note
Intended to ensure data accuracy, clarity, location, size and different code systems. It is worth mentioning that the spray bar code, the existing
A lot of the code system, in the circumstances to meet the above requirements, but also to ensure the readability of bar code, which requires the use of a lot of recognition
Poor scanner for testing.
15. Tectorial membrane and the labeling
Ribbon tectorial membrane (such as Zebra P310, P330 device), generally have a black (with zebra pattern), and silver, is a dye-sublimation printing.
Labeling: Silver, labels produced by other manufacturers supply size from the guests, according to the size to set passwords, tectorial membrane, and labeling
Certain than the password area, to ensure full cover passwords, fully guarantee the security of data.
Tectorial membrane, or the effect of labeling should pay attention to as much as possible not to tilt.
16. Anti-counterfeiting
Anti-counterfeiting points straddle anti-counterfeiting, forgery and UV laser anti-counterfeit laser (ultra-violet), etc..
Straddle security: It is defined as the edge of foil or paste, or spray labeling text, patterns, numbers as a password security;
Laser technology security: this refers to the laser laser film laminated pressed by the security effects of the card body, but also the adoption of a small area heat l
Hot Stamping up;
Anti-counterfeiting UV (ultra-violet): refers to the UV security ink through the silk screen printed on the card material, only with ultraviolet light can be
See the effects (such as the Detector).
17. Fight photos
Print photos in two ways:
1) The first and print out the photos, photo printed on a thin membrane, and then laminated to achieve, all such parties
Type need to be completed before lamination.
2) the use of four-color dye-sublimation print ribbons, in this way in the finished card body to complete.
18. Inspection
Tested in accordance with relevant standards, including full inspection and sampling. Test points: IQC, IPQC, FQC, AQC.
IQC: feeding test, whose main duties are as follows: 1) to send the goods to the suppliers, in accordance with technical standards, work instructions with the best
Measurement systems for testing; 2) delivery of materials suppliers for quality assessment, such as monthly, quarterly assessments; 3)
Suppliers of goods sent to the abnormal feedback, tracking, and to assist suppliers to improve;
IPQC: Process control refers to the products from material production to final packaged product quality control procedures.
FQC: product control, 1) is responsible for implementing the company's inspection standards; 2) is responsible for inspection and the number of full-inspection statistics (Part-wide review in mind
Recorded in table); 3) is responsible for order mantissa of the report to us (qualified Quality tab); 4) is responsible for negative feedback, tracking and re-inspection to confirm
(Notice of non-performing product limit);
AQC: on the finished product quality inspection and management.
19. Packaging
In accordance with the requirements of the guests packed series leaflets or packaging, and packing according to the logistics requirements of packaging, attention inside and outside the box
And accurate data and the corresponding box number.
